Mistakes to Steer Clear of When Installing Electric Fencing

The key purpose of electric fencing is to keep the intruders, whether animals or humans, away from a property. These electric barriers are used ideally at government-owned buildings, properties of army, and agricultural lands. When not installed properly, the chances of encroachment rises.

Here are some of the most common mistakes that one should avoid when installing electric fencing –

Not installing insufficient ground rods for proper earth grounding – To set up an electric fence post, you would need tolerable earth grounding. It is an essential need, for which you will need at least three to four galvanized poles, each six to eight feet long. You need to attach them with first-rate quality ground clamps. Poor quality would not be as efficient in preventing trespassing as good quality ones.

Use different varieties of metals – If you are considering electric fencing wires of diverse metals, you might be stepping ahead towards installing a weaker security system. It is always advisable to use only one variety of metal wires in fencing. When wires of different materials are joined, their oxidization or decay rate tends to be higher.

Tightly tied wires – When a fence post is being created, it needs to be ensured that the wires are not tied forcefully. There should be maintained proper elastic between the joints of the wires. For this, the wires should not be fastened firmly; they should be tied loosely.

Not training your pets – All your pets should be given apposite training about the electric fencing and wires. You need to teach them to stay away from the fence. It will avert the likelihood of accidents at your property.

Not placing indications about the electric fencing – Another important exercise when installing electric fencing is to flag the fence for increasing its visibility. Generally, people use white or red flags to show the electric boundary. Not placing flags near the fence would raise the chances of accidents and casualties at your premises.

Growing grass near the barrier – Wet grass can create serious hurdles, during early morning hours, due to do, or during rainfall. The wetland, grass and tree leaves are fluent conductors of electricity. You should avoid cultivating grass or plants near the railing.

Developing new barrier near the old one – You should never ever set up a new fencing near an abandoned fencing. The wires of old barrier can create a mess with the ones of the newly established barrier. It would be dangerous and unsafe.

Additionally, installing voltmeters near the power supply source is always advisable. It will help you control the quantity of current, to be supplied through wires. You should always prefer high tensile smooth wires; these are durable and affordable.