Mistakes to Steer Clear of When Installing Electric Fencing

The key purpose of electric fencing is to keep the intruders, whether animals or humans, away from a property. These electric barriers are used ideally at government-owned buildings, properties of army, and agricultural lands. When not installed properly, the chances of encroachment rises.

Here are some of the most common mistakes that one should avoid when installing electric fencing –

Not installing insufficient ground rods for proper earth grounding – To set up an electric fence post, you would need tolerable earth grounding. It is an essential need, for which you will need at least three to four galvanized poles, each six to eight feet long. You need to attach them with first-rate quality ground clamps. Poor quality would not be as efficient in preventing trespassing as good quality ones.

Use different varieties of metals – If you are considering electric fencing wires of diverse metals, you might be stepping ahead towards installing a weaker security system. It is always advisable to use only one variety of metal wires in fencing. When wires of different materials are joined, their oxidization or decay rate tends to be higher.

Tightly tied wires – When a fence post is being created, it needs to be ensured that the wires are not tied forcefully. There should be maintained proper elastic between the joints of the wires. For this, the wires should not be fastened firmly; they should be tied loosely.

Not training your pets – All your pets should be given apposite training about the electric fencing and wires. You need to teach them to stay away from the fence. It will avert the likelihood of accidents at your property.

Not placing indications about the electric fencing – Another important exercise when installing electric fencing is to flag the fence for increasing its visibility. Generally, people use white or red flags to show the electric boundary. Not placing flags near the fence would raise the chances of accidents and casualties at your premises.

Growing grass near the barrier – Wet grass can create serious hurdles, during early morning hours, due to do, or during rainfall. The wetland, grass and tree leaves are fluent conductors of electricity. You should avoid cultivating grass or plants near the railing.

Developing new barrier near the old one – You should never ever set up a new fencing near an abandoned fencing. The wires of old barrier can create a mess with the ones of the newly established barrier. It would be dangerous and unsafe.

Additionally, installing voltmeters near the power supply source is always advisable. It will help you control the quantity of current, to be supplied through wires. You should always prefer high tensile smooth wires; these are durable and affordable.

Common Mistakes to Avoid With Electric Fencing

Most people think setting up an electric fence is just as easy as setting up non-electric fences. They do not take into account the sensitivity of the charges associated with electric fencing. Because of this, there are several common mistake people make when setting up their electric fences that render them useless. Below are some common mistakes and ways to avoid them.

Setting up posts too closely
The average fence has posts set up every 50 feet for large fences and even closer for smaller areas. Because of this, people will also set their fence posts this closely. However, because of the tautness of the fence, if an animal tries to break through, they usually damage the fence and uproot the posts. The posts should be spread further apart to allow some give in the fence. This way, if an animal tries to break through, the fence will give some without breaking or uprooting the posts. Since the fence gives instead of breaking, it allows the animal to feel the full force of the electric shock guaranteeing that the animal will think twice before charging the fence again.

Not Accounting for wet weather conditions
It is no shock (excuse the pun) that fences are affected by wet conditions. What is a surprise is that wet grass lying on the fence can absorb the charge from the fence rendering it useless. To avoid this common mistake, keep grass around the fence cut short. Otherwise, if you cannot cut the grass on a regular basis, wire the bottom of the fence separately from the top and install a separate switch. That way, when the grass is high, you can turn off the switch for the lower part of the fence and keep the charge on the upper portion.

Not Enough Voltage
The purpose of an electric fence is to deliver a shock to an animal to keep it in, or out, of the fence. Some people think they have purchased faulty fencing when animals escape because they were not deterred by the shock. However, the lack of shock may be attributed to the setup of the fence as opposed to the fence itself. To avoid this mistake, make sure you install a strong charger. Also, if you do not have a voltmeter, get one. This is the only way for you to know if the shock is strong enough. If all else fails, check the size of your wires. The bigger your wires, the more electricity they carry.

An electric fence is a worthwhile buy if you need to keep animals in your yard. Just make sure you avoid these mistakes when setting up your fence, good luck.

Advantages of Using Electric Fencing and the Classified Shock Level Received

There are many reasons why people install electric fencing around their premises, whether it is a building or a piece of land. Electric fencing is really useful as it acts as a strong barrier to prevent the movement of both animals and people in and out of the contained area. There are three classified shock levels which vary between moderate, painful and lethal.

In agriculture electric fencing provides many advantages. Livestock is usually contained within a field or piece of land and the purpose of the fencing is to stop them escaping. The shock given to the livestock ranges between moderate and painful, but this varies according to the animal that is being contained. For example, the level of electric current passing through the wiring containing sheep will be a lot less than the current passing through electric wiring containing a horse. This is because the thickness of the skin and the pain threshold of a horse is a lot more than a sheep, a stronger current is therefore needed to deter the horse.

Electric fencing surrounding livestock also helps prevent unwanted guests, such as predators or humans entering. For example, farmers keeping livestock such as chickens or sheep often find that predators such as foxes try to access the pens to kill the livestock. Many farmers that have installed this type of fencing around the pen perimeters have seen a massive decline in the amount of livestock lost to kills from other animals. However, when installing electric fencing around your premises you must regularly check the fence to see if has been disrupted or interfered with as the current can easily be lost if the circuit is broken, by objects or animals.

Electric fencing provides many advantages when it is used to guard the perimeters of both high security prisons and closed land borders. The level of electric current passing through the wiring at this level is lethal and will kill on impact.

There are many non-lethal types of fencing that will cause a moderate to painful shock level. This type of fencing is used to protect government properties and military bases from unwanted trespassers. Many airports and private properties are also surrounded by this non-lethal type of electric fencing. Airports use it to protect the runways from wild animals passing through as properties use it to protect against intruders. Accompanied with the electric fence is usually an alarm or a signal of some kind to alert people or animals of the potential danger if they come into contact with the fence.